Cisco SIP, CUBEs and Gateways
Book Now - 2 Delivery Methods Available:Scheduled Online Onsite
In this course, you will focus on the legacy gateway and router portions of IP Telephony. You will gain extensive experience with the configuration of legacy analog telephony technologies such as Foreign Exchange Station (FXS), Foreign Exchange Office (FXO), Primary Rate Interface (PRI). In addition to legacy technologies you will gain hands on experience with CUBE and SIP protocols. You will build a working Cisco Unified Communications Manager which will support all major gateway protocols such as MGCP, H.323, and SIP. Troubleshooting will be addressed as a gateway level including common debug techniques and commands.
You'll gain an understanding of converged voice and data networks as it relates to gateway design and deployment. You will gain comprehensive hands-on experience configuring and deploying Gateways, CUBEs, Quality of Service, and troubleshooting in VoIP networks.
In addition to the knowledge and skills required to integrate gateways into an enterprise VoIP network, you’ll learn how to build and test sophisticated IP telephony dial plans that use both CUCM Dial Plan and Dial Peers at an IOS level which can be used as a template for a real deployment.
The course includes a comprehensive study of Quality of Service (QoS), in which you’ll learn to configure QoS to support real-time traffic.
Looking for CVOICE - Implementing Cisco Unified Communications Voice over IP and QoS v8.0? This has been retired by Cisco and CSCGW - Cisco SIP, CUBEs and Gateways is the recommended replacement.
After completing this course you should have an understanding of:
- VoIP, components of a VoIP network, VoIP protocols, special requirements for VoIP calls, and Codecs
- Configure gateway interconnections to support VoIP and PSTN calls
- Basic signaling protocols used on voice gateways
- Configure a gateway to support calls using different call control and signaling protocols
- Define a dial plan, describing the purpose of each dial plan component, and implement a dial plan on a voice gateway
- Implement a Cisco Unified Border Element (CUBE) gateway to connect to an Internet Telephony Service Provider
- Investigate the use of various traditional telephony connections, such as FXS, FXO, E&M, T1 (CAS and PRI), and E1 (CAS and PRI)
- Configure and troubleshoot Cisco's new ISR routers and explore their DSP configuration (PVDM3 cards)
- Configure H.323 gateways and review their functions and operation
- Configure Session Initiation Protocol (SIP) and Media Gateway Control Protocol (MGCP)
- Experience G.711, and G.729 voice coding schemes
- Configure Call Admission Control three different ways
- Configure proper Caller ID
- Experience real-world connections to PBXs, and the PSTN
- Configure your router/gateway equipment to connect to our public dial plan network using different call control protocols and procedures
Network engineers, architects, and support staff who: Maintain and configure voice and data network devices: Are considering various methodologies to implement VoIP: Require a fundamental understanding of the issues and solutions related to implementation: Require a fundamental understanding of packet telephony technologies that are common for both enterprise and service provider applications.
We work with the following best of breed training partners using our bulk buying power to bring you a wider range of dates, locations and prices.
Introduction to Voice Gateways (4 topics)
- Cisco UC Networks and the Role of Gateways
- Gateway Call Routing and Call Legs
- Gateway Voice Ports Configuration
- DSP Functionality, Codecs, and Codec Complexity
Dial Plan Implementation (4 topics)
- Call Routing and Dial Plans
- Digit Manipulation
- Path Selection Configuration
- Calling Privileges Configuration
Gatekeeper and CUBE Implementation (2 topics)
- Fundamentals of Gatekeepers
- Cisco Unified Border Element
Quality of Service (4 topics)
- QoS Mechanisms and Models
- Classification, Marking, and Link Efficiency Mechanisms
- Managing Congestion and Rate Limiting
- Cisco AutoQoS
Labs - Part 1 (14 topics)
- Lab 1: Remote Labs Connectivity
- Lab 2: Topology and Deployment Walkthrough
- Lab 3: CUCM Disaster Recovery
- Lab 4: MGCP Gateways
- Lab 5: Route Groups and Route Lists
- Lab 6: CUCM Dial Plan
- Lab 7: IP Phone Registration
- Lab 8: 9951 Registration
- Lab 9: Unified FX
- Lab 10: Traditional Route Patterns and Dial Plan Testing with MGCP
- Lab 11: CUBE and SIP Trunks
- Lab 12: Traditional Route Patterns and Dial Plan Testing with SIP
- Lab 13: H.323 Gateways
- Lab 14: Traditional Route Patterns and Dial Plan Testing with H.323
VoIP Call Legs (7 topics)
- VoIP Call Leg Characteristics
- VoIP Media Transmission
- H.323 Signaling Protocol
- SIP Signaling Protocol
- MGCP Signaling Protocol
- Requirements for VoIP Call Legs
- VoIP Call Legs Configuration
Labs - Part 2 (17 topics)
- Lab 15: Analog FXO
- Lab 16: Traditional Route Patterns and Dial Plan Testing with FXO
- Lab 17: Analog FXS
- Lab 18: Traditional Route Patterns and Dial Plan Testing with FXS
- Lab 19. PRI and T1-CAS
- Lab 20. Traditional Route Patterns and Dial Plan Testing with PRI and T1-CAS
- Lab 21: Deep Dive - VoIP Dial Peers
- Lab 22: Deep Dive - PSTN Dial Peers
- Lab 23: Deep Dive - Dial Peer Digit Manipulation
- Lab 23: IOS Conference Bridges
- Lab 24: IOS Transcoding
- Lab 25: IOS Media Termination Points
- Lab 26: IOS Gatekeepers
- Lab 27: Call Admission Control
- Lab 28: Configuring AutoQoS
- Lab 29: Configuring WAN QoS Policies
- Lab 30: Configuring LAN QoS Policies
Attendees should meet the following prerequisites:
- Working knowledge of networking fundamentals, including LANs, WANs, and IP switching and routing
- Ability to configure and operate Cisco routers and switches and to enable VLANs and DHCP
- Knowledge of traditional PSTN operations and technologies
- Attendance of CICD or CIPTV1 is recommended.
The courses below may help you meet the knowledge level required to take this course. If you are unsure please ask a training advisor .
CICD: Implementing Cisco Collaboration Devices
This 5-day course provides the skills required to maintain and operate a Cisco Unified Communications solution and attempt CCNA Collaboration certification.
ICND1: Interconnecting Cisco Network Devices Part 1
A 5-day Training Course on ICND1: Interconnecting Cisco Network Devices Part 1; Install, operate, and troubleshoot a small branch office Enterprise network.
ICND2: Interconnecting Cisco Network Devices Part 2
A 5-day Training Course on ICND2: Interconnecting Cisco Network Devices Part 2; Learn to Install, operate, & troubleshoot a small-medium office Enterprise network.
Please select from the dates below to make an enquiry or booking.
Different pricing structures are available including special offers. These include early bird, late availability, multi-place, corporate volume and self-funding rates. Please arrange a discussion with a training advisor to discover your most cost effective option.